The correct maintenance method of ULV fogger

ULV fogger is widely used ,It can improve work efficiency, saving working time, reducing the amount of labor. Therefore, ulv fogger maintenance is very important, the following is the correct maintenance method of ulv fogger.
(1) Pre-use check. To check carefully whether the boom and nozzles are clogged, water filter dirty, whether there is debris in the barrel, pressurized cup whether there is pressure, connecting rod bolts are loose and so on. When necessary for treatment, or once a problem not only hurt the machine lost work time, and likely to cause pesticide poisoning.
 (2) Avoid using soap suds, cleaning parts. In appearance and parts cleaning spray, first applied with detergent, then scrub with a soft brush, then hose sets flush on the tap. After drying, the metal parts on the smear quality grease.
  (3) Repair glue preparation. Spray lance outer barrel cracks or breakage, can be customized with repair glue repair. Bonding before the first wash clean the surface to be repaired. After drying, brush coating, dry for some time after degreasing the glass cloth cover, painted several plastic, 24h at room temperature can be fully cured.
 (4) After the closure should be properly kept. After disabling the liquid spray should barrel, hose, spray bar and other parts of exterior cleaned, with particular attention except pump and grease on the bottom of the barrel recesses of the earth, because the majority of pesticides on sprayers have some corrosion, so disabling promptly after wash again with detergent, then rinse with water. Those who can disassemble the parts, must be removed to wash clean. Entire fogger to fly in dry and ventilated warehouse, not on the dark, dank corner, do not open storage.