The failures and solutions of mini fogger machine

Inadequate spray pressure and poor atomization of mini fogger machine: due to inlet valve the dirt blocking, remove the inlet valve, with a cloth to remove dirt; because the cup is damaged, it can be replaced with a new cup; a result of a connecting parts not dress ring, or ring damage and leaks, retrofitting or replacement seals.
The mini fogger machine can not fog spray: due to the nozzle inclined holes clogged by dirt, dredge inclined holes; due to the orifice plug the detachable cleaning spray holes, but not use wire or copper needles and other hard objects to poke the orifice to prevent perforation expand, so that the spray quality deterioration; the dirt filter clogging or too Ruoyin casing valve ball blocking, a ball should clean the filter and cleaning.
The mini fogger machine switch leaking or screw fixed: due to the switch cap is not tightened, tighten the switch cap; Ruoyin the washer switch core wear, should be replaced washer; switch screw is placed longer, or used for a long time, the switchcore due to the erosion of the pharmaceutical bonding live, you should remove the parts in kerosene or diesel cleaning; remove the difficulty can be soaked in kerosene for a period of time, then demolition can be removed, can not be beat with a hard object.
Various joints leaking of the mini fogger machine: because the connector is loose, tighten the nut; washers lie flat because the washer is not flat or damaged, should be, or replace the gasket; due to the washer drying shrinkage hardened animal oil macerated before use. This failures and solutions also can be used other garden sprayers.