Mosquito sprayer failures and elimination

Mosquito sprayer is common used in our daily life for repelling mosquito. It is important for us to know mosquito sprayer failures and elimination.
1. Spray underpressure and the poor atomization: if water ball valve is piled up by dirt, remove the inlet valve with a cloth to remove dirt; due to the cup is damaged, you can replace the new cup; If for joints not loaded ring, or ring damage and leakage, the mosquito sprayer can be installed or replace the seals.
2. The mosquito sprayer can not spray fog: if because of slant-hole of the nozzle body is clogged with dirt,please cleaning the slant-hole; If for the jet clogging detachable cleaning spray holes, but can not use hard objects such as wire or copper needle poke spray holes, perforations expanding, so that the quality of the spray the deteriorate; If you casing filter is clogged or too the valve ball Geqi, the filter should be cleaned and cleaning the dirt Geqi ball.
3. The mosquito sprayer switch leakage or screw fixed: arises from the switch cap is not tightened, tighten the switch cap; if due to the washers wear on the switch core, replace the washer; the switch screw fixed, because the longer placed, or used for a long time, the switchcore due to the erosion of the drug and bonding to live, should be removed parts cleaning in kerosene or diesel; remove difficulties, soaked in kerosene for a period of time, and then remove to remove, can not be beat with a hard object.