How to solve air blast sprayer not start or start difficult problem

Air blast sprayer has integrated handle design, spray volume can also be sprayed continuously contacts sprayers. This sprayer easy to start, easy to operate, multi-purpose spray meet needs, a wide spray, fog particle size can be adjusted.
 Sprayer does not start or starter problem,the following repair reasons:
1, If there is no fuel in the tank, fill the fuel can replace.
2, If the oil does not flow, you should clean up the oil passages.
3, Such as dirty fuel, oil, water, etc., need to replace the fuel.
4, If too much oil into the cylinder angry hair phenomenon, remove the spark plug and spark plug idling turns dry.
5, The spark plugs do not flash, too much coke or insulator breakdown should remove coke or update insulator.
6, Spark plugs, platinum gap adjustment properly, should be re- adjusted.
7, Capacitor breakdown, damage or high voltage wires off the solution, and breakdown voltage coil shall fix update .
8, There is oil or burned to clear the site to burn oil or polished platinum.
9, Spark plug not tightened, crankcase leaks, cylinder head gasket burn, etc. should be tightened or update relevant parts cylinder head gasket.
10, From tight seal both ends of the crankcase severe wear and should be replaced . Main valve is not open, open to.