How to use mosquito sprayer

Although the mosquito sprayer’s structure is simple, compact and lightweight, and easy to operate, but the use of mosquito sprayer process should pay a lot attention to . Only on the correct use of methods to manipulate mosquito sprayer, in order to ensure efficiency and to ensure the life of mosquito sprayer . The following is the use of mosquito sprayer and precautions:
1. Unscrew the fluid lid, liquid into the barrel, once loaded up to a maximum not exceeding the amount of fluid cement circle or horizontal line is appropriate, then tighten the lid liquid.
2. In the press a few wrenches before cheer, to be lubricated, then twitch the rod cheer, cheer several times, you can spray.
3. The nozzle can spray tighten, loosen can be sprayed straight away.
4. The liquid into the barrel when the nominal volume of the liquid, not more than 40 times the number of cheer, liquid barrel more than the effective amount of fluid into the liquid, the number of operations required to avoid the barrel burst.
5. When the pump reaches a certain number of times, still no spray mist, will have to check whether the nozzles are clogged or nozzle cap screwed too tightly, please send spin, must not be hard-pressed.
6. After playing enough air, not spray nozzle and a dripping phenomenon, slightly tighten the spray bar nut; in tightened after such a gap Shihai leaking wrench, then discharged gas, remove the nozzle, take a look piston rod in the O-rings have put the middle, please put positive.
7. Such as encouragement to feel the rod friction is large, will have to unscrew the gas barrel tube, piston ring around the black rubber coating plus Vaseline or other vegetable oil, machine oil is strictly prohibited. O-ring in the update should also be the case, so cheer feel comfortable, but also to extend the life of the rubber ring;
8. Followed by spray pharmaceutical finished cleaning equipment should be sprayed with water to prevent clogging. Temporarily do not unscrew the barrel when you're deflated, pour the liquid end, long after the suspension used, it should go piston and seals at Tu plus Vaseline or other vegetable oil.