The working process of thermal fogger

Thermal fogger’s structure is simple, easy to use. However, improper use, not only reduces the life of thermal fogger, while reducing the work efficiency. Below in detail, the process of using thermal fogger.
First, Starting the engine . Switch on the ignition system to produce high-voltage, high-pressure arc spark plug release, ignite the mixture. Mixture ignition "explosion", the pressure inside the combustion chamber and the carburetor increased rapidly, which shares the high-pressure gas to the intake valve closure piece intake and at high speed out of the nozzle.
Second, the normal work cycle. Previous work cycle inertial force of the exhaust gas, into the open inlet valve film, the fresh air intake, fuel is sucked from the nozzle. Mixing the hot exhaust gas is flagged ignited, followed by combustion, and exhaust, the pulse motor by the intake - combustion - exhaust cycle, constantly working.
Finally, the thermal fogger sprays. Pressure tube leads from the carburetor A high-pressure gas, making it through the booster check valve, windpipe, add the liquid surface in the medicine chest, under the effect of pressure generated by the liquid suction drug possession, drug switches, spray inflow of drugs inside the nozzle orifice nozzles at high speed airflow under the action of liquid smoke agent is evaporated into mist ejected from the nozzle, and quickly spread diffuse.